4
TABLE OF CONTENTS (con’t)
Programming Hose Tag (PHT) ......................................................................17
Filler Neck Rings/RFID Interface Module .......................................................19
Connecting Cables .......................................................................................19
SECTION 3 - SYSTEM PLANNING .........................................................................23
Fundamental Do’s/Don’ts...................................................................................23
Version Compatibility.........................................................................................26
Developing a Database of Vehicle Records ........................................................26
Selecting the Correct Nozzle Tag .......................................................................26
Selecting the Correct Filler Neck Ring and RFID Extension Cables......................27
Selecting the FMU Mounting Location ................................................................28
Identifying the Vehicle Application......................................................................29
SECTION 4 – AIM2™ INSTALLATION ....................................................................31
Installation Options ...........................................................................................32
Using the OBD Port ......................................................................................33
Using a Vehicle Speed Sensor (Odometer) Input Only....................................34
Using an Analog Chronometer Input ..............................................................36
AIM2™ Post Installation Tests ...........................................................................39
SECTION 5 – AIM2™ PROGRAMMING...................................................................41
Develop an FMU-3500 Programmer....................................................................41
Configure an FMU-3500 as an FMU-3500 Programmer...................................41
Through a Laptop Connection ..................................................................41
Through the Central Controller.................................................................42
Develop a Portable FMU-3500 Programmer
from a Fully Configured FMU-3500................................................................42
Develop an FMU-3500 Programmer from an FMU-3500 Demonstration Unit.............. 43
Create an AIM2™ Programmer Prokee
®
/Smartcard
...........................................................44
Programming the AIM2™ Module
............................................................................ 46
To Next Page
Loading...