System Settings Procedure
105
Tools
5
When a passcode is required, select [Next]
and enter the system administrator’s
passcode, then select [Enter].
Note • The default user ID is "11111".
• The default passcode is "x-admin".
• The machine displays the following
message if the system administration
login failed:
"Login failed. Re-enter User Details and
select Confirm."
• The machine displays the following
message if the authentication failed more
than the specified number of times:
"You have made the maximum number of attempts to access the system. Access denied."
Step 3 Selecting [Tools]
1
Select [Tools].
Step 4 Selecting an Item on the [Tools] Screen
On the [Tools] screen, select an item to be set.
For the items that can be selected on the [Tools] screen, refer to "Tools Menu List" (P.108).
1
Select the item to be set.
System Settings
You can set or change the default values.
Note • When [ScantoServerFax] is selected in the System Settings, [Scan Service Settings] is
replaced with [Scan/Fax Service Settings].
îš„Common Service Settings
Allows you to configure the settings relating to the machine itself.
For more information, refer to "Common Service Settings" (P.123).
îš„Copy Service Settings
Allows you to configure the copy feature defaults, copy operation control, button
indications, and so on.
For more information, refer to "Copy Service Settings" (P.148).
To Next Page
Loading...
Need help?
General
