Common Service Settings
135
Tools
5
Job Flow Error Report
Select whether or not to automatically print a [Job Flow Error Report].
Maintenance
You can initialize the hard disk or delete data recorded in the machine.
Initialize Hard Disk
Initializes the hard disk.
Data deleted by initialization includes supplementary fonts, ESC/P, and HP-GL/2 (option)
forms.
Note • The secure print documents and logs are not erased.
Delete All Data
This feature is used to prevent the leakage of customer’s confidential information when the
machine is returned to Fuji Xerox. By executing [Start], all data registered in the machine is
deleted.
Do not use this function.
Software Options
This feature is for customer engineer use. For more information, contact our Customer
Support Center.
Finisher Adjustment
Appears when the Finisher-B1 (option) is attached.
îš„Hole Punch Tool
Specifies either 2/4 Hole Punch or 2/3 Hole Punch (US Specification).
îš„Adjust Punch Position/Booklet Fold Position
Specifies punching position and folding position for a paper size less than B4 and greater
than or equal to B4.
Delete All Certificates/Initialize Settings
All certificates stored in the machine will be deleted, and security settings associated with
certificates will be initialized.
Watermark
You can make settings relating to Watermark.
Date Format
Set the format for printing dates in annotations and Watermark. This setting is common to
Annotation and Watermark.
Three format types are available: 20yy/mm/dd, dd/mm/20yy, and mm/dd/20yy.
Default Watermark Effect
Set the type of text effect for Watermark.
îš„Off
A text effect is not applied.
To Next Page
Loading...
Need help?
General
