5 Tools
162
Tools
5
IPv4 - IP Address Resolution
Allows you to set the method for obtaining the IP address, subnet mask, and gateway
address.
îš„DHCP
The address, subnet mask, and gateway address will automatically be set via DHCP.
îš„BOOTP
The address, subnet mask, and gateway address will automatically be set via BOOTP.
îš„RARP
The address, subnet mask, and gateway address will automatically be set via RARP.
îš„DHCP/Autonet
The address, subnet mask, and gateway address will automatically be set via DHCP/Autonet.
If the machine fails to communicate with the DHCP server, the Auto IP function is
automatically enabled and the machine is assigned an IP address (169.254.xxx.xxx). When
communication between the machine and the DHCP server is recovered, the machine is re-
assigned an IP address, a subnet mask, and a gateway address by the DHCP server.
îš„STATIC
Allows you to manually specify an IP address, a subnet mask, and a gateway address.
Note • [IPv4 - Subnet Mask] and [IPv4 - Gateway Address] are configurable when [IPv4 - IP
Address] is set.
IPv4 - IP Address
Enter the IP address using the numeric keypad when selecting [STATIC] at [IPv4 - IP
Address Resolution].
Note • Enter the address in the format "xxx.xxx.xxx.xxx", where "xxx" is a numeric value in the
range of 0 to 255.
• Specify an IP address using numbers (0 to 9) and periods (.). If you mistyped a character on
the screen, select [Backspace] to delete the character.
IPv4 - Subnet Mask
Enter the subnet mask using the numeric keypad when selecting [STATIC] at [IPv4 - IP
Address Resolution].
Note • Enter the address in the format "xxx.xxx.xxx.xxx", where "xxx" is a numeric value in the
range of 0 to 255.
• Specify a subnet mask using numbers (0 to 9) and periods (.). If you mistyped a character on
the screen, select [Backspace] to delete the character.
IPv4 - Gateway Address
Enter the gateway address using the numeric keypad when selecting [STATIC] at [IPv4 - IP
Address Resolution].
Note • Enter the address in the format "xxx.xxx.xxx.xxx", where "xxx" is a numeric value in the
range of 0 to 255.
• Specify a gateway address using numbers (0 to 9) and periods (.). If you mistyped a
character on the screen, select [Backspace] to delete the character.
IPv4 - IP Filter
Select whether to limit IP addresses that can access the machine.
Note • To set the IP addresses that the machine accepts connection from, use CentreWare Internet
Services. For details, refer to "CentreWare Internet Services Settings" (P.249).
IPv6 Address Manual Configuration
Allows you to select whether or not to configure the IPv6-address settings manually.
To Next Page
Loading...
Need help?
General
