Fuji Xerox ApeosPort-III C3300 Administrator's Guide

2 Paper and Other Media
42
Paper and Other Media
2
Changing the Paper Size
The following describes how to change the paper size for the Trays 1 to 4.
Note • The paper types for the Trays 1 to 4 are preset. Normally, plain paper is set. When changing
the setting to a different paper type, change the paper quality settings to match the type of
paper to be loaded to maintain high print quality.
For more information on paper type, refer to "Changing the Paper Settings" (P.44).
• Non-standard size paper can be set in the Trays 1 to 4. When setting a non-standard paper
size, you must register the paper size. For information about registering paper sizes, refer to
"Paper Tray Attributes" > "Paper Size" (P.129).
For information about paper size, refer to"Paper Size Settings" (P.142).
For a description of how to make copies on non-standard size paper, refer to "3 Copy" > "Copy" >
"Paper Supply (Selecting the Paper for Copying)" in the User Guide. For a description of how to print to
non-standard size paper, refer to the print driver’s online help.
Changing the Paper Size for the Trays 1 to 4
The following describes how to change the paper size for the Trays 1 to 4.
Note • The paper types for the Trays 1 to 4 are preset. There are 8 paper types: Plain paper, Bond
paper, Recycled paper, Custom paper 1 to 5, and normally, plain paper is set. When
changing the setting to a different paper type, change the paper quality settings to match the
type of paper to be loaded to maintain high print quality.
For more information on paper type, refer to "Changing the Paper Settings" (P.44).
• When setting a non-standard paper size, you must register the paper size. For information
about registering paper sizes, refer to "Paper Tray Attributes" (P.128).
For a description of how to make copies on non-standard size paper, refer to "3 Copy" > "Copy" >
"Paper Supply (Selecting the Paper for Copying)" in the User Guide. For a description of how to print to
non-standard size paper, refer to the print driver’s online help.
1 Pull out the Tray towards you until it stops.
Important • While the machine processes a job, do
not pull the tray out that the job uses.
• Do not add a new stack of paper on top of
the remaining paper in the tray to prevent
paper jams or making mistakes of paper
loading. Remove the remaining paper in
the tray, put it on top of the new stack of
paper, and then load the stack of paper in
the tray.
2 Remove any paper loaded in the tray.
3 While pinching the two paper guides, move
them to the edges of the tray.

Fuji Xerox ApeosPort-III C3300 Specifications

General

Brand	Fuji Xerox
Model	ApeosPort-III C3300
Category	All in One Printer
Language	English