Fuji Xerox ApeosPort-III C3300 Administrator's Guide

4 Machine Status
82
Machine Status
4
[Machine Configuration] Screen
You can check the machine configuration.
1 Select [Machine Configuration].
2 Check the machine configuration in a screen
displayed.
Note • Select [ ] to return to the previous
screen or [ ] to move to the next screen.
On the [Machine Configuration] screen, you can check the following items.
Note • [Output Device] indicates whether or not a finisher (optional) is installed. If Finisher is
installed, it is displayed as "Finisher".
[Software Version] Screen
You can check the software version.
1 Select [Software Version].
2 Check the software version in a screen
displayed.
On the [Software version] screen, you can check the following items.
z
Configuration Code
z
Image Compression Kit
z
USB
z
Document Feeder
z
PostScript
z
Fax Main Board
z
Paper Tray
z
ESC/P
z
Fax Extended Board 2
z
Offset Stacking Module
z
HP-GL/2
z
Output Device
z
PCL
z
Booklet Maker
z
KS5843
z
Hard Disk
z
KSSM
z
Page Memory Size
z
KS5895
z
System Memory Size
z
XPS
z
Controller ROM
z
ADF ROM
z
IOT ROM
z
Fax ROM
z
HCF ROM
z
Fax G3 Option ROM
z
Finisher C ROM
z
IPS Accelerator ROM
z
IIT ROM
z
SJFI

Fuji Xerox ApeosPort-III C3300 Specifications

General

Brand	Fuji Xerox
Model	ApeosPort-III C3300
Category	All in One Printer
Language	English