Fuji Xerox ApeosPort-VI C4471 Administrator's Guide

Problem Solving
542
Problem Solving
15
"005-001" - "011-999"
003-795
[Cause] When enlarging/reducing a scanned document to the paper size
specified, the reduction/enlargement ratio exceeds the allowed
range.
[Remedy] Take one of the following measures:
z
Manually enter a reduction/enlargement ratio.
z
Change the paper size.
Error Code
Cause and Remedy
005-211
005-275
005-280
005-500
005-281
005-282
005-283
005-284
[Cause] An error occurred in the document feeder.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the error still
is not resolved, contact our Customer Support Center.
005-288
[Cause] An error occurred in the document feeder.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support
Center.
010-328
010-329
010-331
010-332
010-333
010-334
010-335
010-337
010-341
[Cause] An error occurred in the machine.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the error still
is not resolved, contact our Customer Support Center.
010-330
010-360
010-361
010-362
010-363
010-364
010-367
010-368
010-369
[Cause] An error occurred in the machine.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support
Center.
Error Code
Cause and Remedy

Fuji Xerox ApeosPort-VI C4471 Specifications

General

Brand	Fuji Xerox
Model	ApeosPort-VI C4471
Category	All in One Printer
Language	English