Fuji Xerox ApeosPort-VI C4471 Administrator's Guide

Error Code
543
Problem Solving
15
010-370
<ApeosPort-VI C5571/C4471/C3371/C3370/C2271, DocuCentre-VI
C5571/C4471/C3371/C3370/C2271>
[Cause] An error occurred in the machine.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support
Center.
<ApeosPort-VI C7771/C6671, DocuCentre-VI C7771/C6671>
[Cause] An error occurred in the machine.
[Remedy] Confirm the following.
z
Two power codes are connected to the outlets.
z
Two power codes are connected to the machine.
z
Circuit breakers of the machine are ON.
z
Breakers on switchboards are not tripped.
After confirming the above items, switch off the machine
power, make sure that the touch screen is blank, and then
switch on the machine power. If the same message is displayed
again, contact our Customer Support Center.
010-371
010-372
010-373
010-374
010-375
010-376
010-377
010-378
010-379
010-380
010-382
010-398
[Cause] An error occurred in the machine.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support
Center.
011-310
[Cause] An error occurred in the machine.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support
Center.
Error Code
Cause and Remedy

Fuji Xerox ApeosPort-VI C4471 Specifications

General

Brand	Fuji Xerox
Model	ApeosPort-VI C4471
Category	All in One Printer
Language	English