Problem Solving
664
Problem Solving
15
"133-001" - "148-999"
Error Code
Cause and Remedy
133-210
133-211
133-212
133-213
133-214
133-215
133-216
133-217
133-218
133-219
133-220
133-221
133-222
133-223
133-224
[Cause] An error occurred during fax transmission.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the error still
is not resolved, contact our Customer Support Center.
133-226
[Cause] A country code not supported by the machine was specified.
[Remedy] Contact our Customer Support Center.
133-280
133-281
133-282
133-283
[Cause] An error occurred during fax transmission.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the error still
is not resolved, contact our Customer Support Center.
133-700
[Cause] The staple/hole punch setting was cancelled.
[Remedy] Check whether the staple/hole punch position is correct, and
then execute the operation again.
133-701
[Cause] Unavailable characters are included in Name, Company Logo,
Fax Comment, or Local Name and the characters are converted.
[Remedy] Enter available characters to Name, Company Logo, Fax
Comment, or Local Name.
If this error persists, check the settings for the local station. Only
the characters available on the keyboard of the control panel
can be used for the name of the local station.
When the available characters are not clear, enter alphanumeric
characters only.
To Next Page
Loading...
Need help?
General
