Fuji Xerox ApeosPort-VII C3321 User Manual

Emulation
501
Extended Settings
Paper tray 103 [0] (Default): Auto
[1]: Tray1
[2]: Tray2
[3]: Tray3
[4]: Tray4
[5]: Tray5
Note

When [Auto] is selected and paper of the same size in the same orientation in
multiple trays is loaded, paper will be fed in the order of Tray 1  Tray 2  Tray 3
 Tray 4. If paper of the same size is loaded in multiple trays but in different
orientations, feeding of the paper loaded in the landscape orientation is prioritized.
Coordinate
rotation
104 [0] (Default): 0 degrees
[1]: 90 degrees
Color mode 105 [0]: Color
[1] (Default): Grayscale
[2]: Black pen
Parameter Item No. Value
Auto layout 106 Selects whether to perform auto layout of the document or not.
[0] (Default): ON
[1]: OFF
Active palette 107 Selects whether to use a pen specified by command or set on the panel.
[0] (Default): Command
[1]: Panel
No. of prints 108 [1] - [250] (Default: 1): 1 - 250
2 sided printing 110 [0] (Default): None
[1]: Head to head
[2]: Head to toe
Alphanumeric
fonts
112 Sets the font for single-byte characters.
Reference

For more information on fonts, refer to "Available Fonts" (P.480).
[0] (Default): Stroke
[1]: Roman
[2]: Sans serif
Position
adjustment
113
(Vertical
position
adjustment)
Adjusts the hard clip area vertically or horizontally. You can set from -250
mm to +250 mm in 1 mm increments.
[0] (Default): Does not move the hard clip area.
[1] - [250]: -250 to -1 mm
[251] - [500]: +1 to +250 mm
Important

Data outside the printable area is not printed regardless of the adjustment of the
print position. In addition, data moved outside the printable area as a result of
adjusting the print position is not printed.
114
(Horizontal
position
adjustment)
Number of sets 115 Sets the method for specifying the print sets.
[0] (Default): Protocol
[1]: Panel
[2]: Command
Parameter Item No. Value

Fuji Xerox ApeosPort-VII C3321 Specifications

General

Brand	Fuji Xerox
Model	ApeosPort-VII C3321
Category	Printer
Language	English