Fax Procedure
107
If you have more documents
If you have more documents to fax, select [Next Original] on the touch screen while the
current document is being scanned. This allows you to send the documents as one set of
data.
2 While documents are being scanned, select [Next Original].
z
When using the document feeder, load the next document after the device has finished scanning the first
document.
z
You can change the scan settings of the next document by selecting [Resolution], [Original Size], and
[Lighten/Darken] that are displayed after selecting [Next Original].
z
When this screen or the preview screen is displayed and the time of [Auto Clear] lapsed without any
operation, you can set whether or not to continue the job.
3 Load the next document.
4 Select [Start].
If you have more documents, repeat steps 3 and 4.
To Next Page
Loading...
