2 Product Overview
46
Switching the Power Off
The following describes how to switch the power off.
z
If the power is switched off, all the services of the device will stop. When using the device throughout the day
for jobs such as receiving fax, do not switch the power off.
1 Before switching the power off, make sure that the device has completed all copy or print
jobs. Then, make sure that the Data LED does not blink.
z
Do not switch the power off in the following situations. If the power is switched off, the processing data may
be erased.
z
While data is being received
z
While a job is being printed
z
While a job is being copied
z
While a job is being scanned
z
When switching the power off, wait 5 seconds after outputs have been delivered.
2 Press the Power button.
A menu opens, where you can choose a power option.
Cancel
Closes the menu.
Reboot
Reboots the device.
Enter Power Saver
Puts the device to the Power Saver mode.
<TEST> button
Ground fault
interrupter
To Next Page
Loading...
Need help?
General
