7 Problem Solving
194
3 Return the handle [2g] (1), and push the Tri-fold output tray [2d] in (2).
4 Close the folder unit cover of the Folder Unit CD1.
z
A message will be displayed and the device will not operate if the folder unit cover of the Folder Unit CD1 is
even slightly open.
Paper Jams in the Finisher D6 with Booklet Maker
Paper jam in the Finisher
When Lamp E1 is Lit
1 Make sure that the device has stopped, and open the finisher front door.
2 Move handle [1a] leftwards (1), and remove the jammed paper (2).
z
Hold the end of the paper and remove the paper.
To Next Page
Loading...
