Replacing Toner Cartridge
123
z
When replacing a toner cartridge, toner may spill and soil the floor. We recommend laying paper on the floor
beforehand.
z
The use of toner cartridges not recommended by Fuji Xerox may degrade image quality and performance.
Use toner cartridges recommended by Fuji Xerox.
z
When the remaining amount of toner is low, the device may stop printing and display a message. If this
occurs, replace the toner cartridge to resume copying or printing.
z
Replace toner cartridges while the device is on.
z
When the device is in the Power Saver mode, wake the device from the Power Saver mode by pressing the
Power button and select [Machine Status] on the Home screen before you replace the toner cartridge.
z
Copy or print density may decrease slightly after the message "Please order a XXX Toner Cartridge" appears
on the touch screen.
z
If you replace a toner cartridge with a partially used toner cartridge, the number of pages that you can copy
or print after the message "Please order a XXX Toner Cartridge" is displayed may differ significantly from the
values described in the above table.
1 Make sure that the device is not operating, and open the device front toner cover.
2 Hold the lower part of the toner cartridge of the color indicated in the message and gently
pull it out.
z
"Y", "M", "C", or "K" indicates Yellow, Magenta, Cyan, and Black, respectively.
To Next Page
Loading...
Need help?
General
