7 Problem Solving
160
5 Insert the paper into the tray with the printing side facing up until its leading edge lightly
comes up against the paper feed entrance.
z
Do not load paper exceeding the maximum fill line. It might cause paper jams or device malfunctions.
When Lamp E4 is Lit
1 Open the front door of the High Capacity Feeder.
2 Move the handle [1a] to the rightward (1) and turn the knob [1c] to the right (2). Remove
the jammed paper.
z
If paper is torn, check for any torn pieces of paper in the tray.