Paper Jams
177
When the Interface Decurler Module D1 is installed
1) Make sure that the device has stopped, and open the Interface Decurler Module front
door.
2 Open the bottom right door while sliding the door latch downwards.
3 Remove the jammed paper.
z
If the paper is torn, make sure no piece of paper remains inside the device.
4 Close the bottom right door.
z
If the bottom right door is not completely closed, a message will appear and the device remains paused.
5 When the following option is installed, perform the following procedure.
When the C3 Finisher or the C3 Finisher with Booklet Maker is installed
1) Return the handle [1c] to its original position, and close the Transport Unit V1 front
door.
z
If the front door is not completely closed, a message will appear and the device remains paused.
To Next Page
Loading...
Need help?
General
