Paper Jams
185
3 Remove the jammed paper.
z
If paper is torn, check for any torn pieces of paper inside the device.
4 Return the handle [3d] to its original position.
5 Close the finisher front door.
z
If the finisher front door is not completely closed, a message will appear and the device remains paused.
Paper Jams at the Handle [3d] (when the paper is ejected at the output area)
1 Gently pull the jammed paper to the right to remove.
z
If paper is torn, check for any torn pieces of paper inside the device.
Paper Jams in the Booklet Unit [4] (For C3 Finisher with Booklet Maker)
1 Open the finisher front door.
To Next Page
Loading...
