7 Problem Solving
230
z
The staple cartridge is firmly inserted. A slight force is required to pull the cartridge out of the finisher.
z
When the C3 Finisher Staple Unit 65 Sheets is installed, pull down the orange lever, and pull out the staple
cartridge.
4 After removing the staple cartridge, check inside of the finisher for any remaining staples.
5 Pull up the metal part of the staple cartridge as shown in the illustration.
6 Remove the jammed staples (1), and then return the metal part pulled up in step 5 to the
original position (2).
Be careful in removing jammed staples.
To Next Page
Loading...
