Stapler Faults
233
6 Return the booklet staple cartridge to its original position.
7 Slightly push the booklet staple cartridge upwards, and make sure that it clicks into place.
z
Return the booklet staple cartridge until ( ) of the booklet staple cartridge is fitted in ( ) of the booklet
unit.
8 Return the booklet unit to its original position.
9 Close the finisher front door.
z
If the door is not closed completely, a message appears and the device will remain paused.
If you cannot remove jammed staples even after you perform the above procedure,
contact our Customer Support Center.
To Next Page
Loading...
