Loading Documents
95
z
To avoid paper jams, use the document glass for folded or wrinkled documents, cut-and-pasted documents,
curled paper, or back carbon paper.
z
2-sided scanning of lightweight paper (38 - 49 gsm) is not supported.
z
Set the original documents at the upper-left corner so that the document size will be detected correctly.
1 Remove any paper clips and staples before loading a document.
2 Load the document face up (when the document is 2-sided, place the front side up) in the
center of the document feeder.
z
The Confirmation indicator lights up when the document is loaded correctly. If the indicator does not light,
the device may be detecting the document on the document glass. Load the document again.
3 Adjust the document guides to match the size of the document loaded.
Report
A
B
ABC
To Next Page
Loading...
