3 Copy
132
Copy
3
Folding (Outputting Bi-Folded)
This feature allows you to fold copies in half, or crease in half.
Important • When the Finisher-B1 is installed, do not remove output copies from the finisher tray until all
the output copies have been delivered.
Note • The supported paper orientation is only . Select the tray whose orientation is set to .
• This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
1 Select [Folding].
2 Select any option.
îš„Off
Does not fold copies.
îš„Single Fold
This option is displayed when the Booklet Maker Unit for Finisher-B1 (optional) is
installed.
Creases copies in half.
Preset Repeat Image (Making Multiple Copies on a Single Sheet)
This feature allows you to repeatedly copy one original onto equally divided areas
according to the specified number of copies.
Note • When you select an option other than [Auto %] in [Reduce/Enlarge], image loss may occur
depending on the image size of the document.
1 Select [Preset Repeat Image].
To Next Page
Loading...
Need help?
General
