Energy Saver Mode
53
Product Overview
2
Exiting the Energy Saver Mode
The following describes how to exit the Energy Saver mode.
The Energy Saver mode is exited in the following instances:
z
Pressing the <Energy Saver> button
z
Receiving a job
z
Selecting [Apply] in CentreWare Internet Services
When the following device is connected to the machine and a user performs the
following operation, the Energy Saver mode can be deactivated without pressing the
<Energy Saver> button.
z
Touch the card to IC Card Reader (purchase separately)
Note • If the machine is in the Sleep mode, however, the Sleep mode will not be deactivated by the
operation above. Set the time long to elapse until the machine enters the Sleep mode. For
more information on how to change the time to elapse until the machine enters the Sleep
mode, refer to "1 Before Using the Machine" > "Energy Saver Mode" > "Changing the
Interval for Entering Energy Saver Mode" in the Administrator Guide.
1 Press the <Energy Saver> button.
123
456
789
0#
C
<Energy Saver> button
To Next Page
Loading...
Need help?
General
