Fuji Xerox DocuCentre-IV C2260

5 Scan
292
Scan
5
To set the file name
1 Select [File Name].
2 Enter a file name using the displayed keyboard.
For information on how to enter characters, refer to "Entering Text" (P.62).
Note • When each page is saved as one file, the page number is added to the end of each file
name.
• Up to 128 characters can be entered as a file name for the Scan to PC service.
• Up to 28 characters can be entered as a file name for the E-mail service.
• Up to 28 characters can be entered as a file name for the Store & Send Link service.
• Up to 40 characters can be entered as a file name for the Network Scanning service.
Reply To (Specifying a Reply Address)
When using the E-mail service, you can specify the address for reply.
1 Select [Reply To].
2 Enter an address for reply.
Reply To
Select the [Reply To] box to display the keyboard screen on which you can enter an
address for reply.
Clear
Deletes the address entered in [Reply To].
Reply To Me
Uses the address specified in [From] on the [E-mail] screen as a reply address.
Note • [Reply To Me] is selectable only when an address is specified in [From] on the [E-mail]
screen.
Address Book
Allows you to select a reply address from the Address Book.
For more information, refer to "Address Book (Specifying an E-mail Address)" (P.242).