Output Format
137
Copy
3
1 Specify the orientation of the document in
[Original Orientation] on the [Layout
Adjustment] screen.
2 Place the document slightly away from the top left corner of the document glass, and
close the document glass.
Important • Always use the document glass when copying. You cannot use the document feeder with
this feature.
• Specify the orientation of the original document correctly.
• If the edges of the image are missing, slightly move the card inward on the document glass
so that the whole image can be scanned.
For information on how to specify the orientation of a document, refer to "Original Orientation
(Specifying the Orientation of Loaded Documents)" (P.111).
3 Select [ID Card Copy].
4 Select [On].
Off
Disables ID card copying.
On
Enables ID card copying.
Original document
Front side
Back side
Original orientation
Copied output
Front side
Back side
To Next Page
Loading...
