System
131
CentreWare Internet Services
7
Disk Overwrite
Select whether or not to conduct hard disk overwriting.
When print processing is completed, the data is deleted from the hard disk and the area on
which the deleted data was stored is automatically overwritten with blank data. This
feature prevents unauthorized retrieval or restoration of the data recorded on the hard disk.
It also applies to other information stored temporarily by the system.
The Disk Overwrite operation can take an hour or more to complete, depending on the size of the drive and
the number of files.
When the job starts, it cannot be cancelled.
The button appears as [Edit] if the Disk Overwrite is disabled or [Edit and Overwrite Now] if Disk Overwrite is
enabled.
This feature may not be available depending on the model or your machine configuration. For information,
contact our Customer Support Center.
Common
Data Overwrite After Job Completion
Select this to enable overwriting of data on the hard disk drive.
Number of Overwrites
Select the number of overwrites either once or three times.
[OCSP] [Send Query to Responder
With]
Select how to access an
OCSP responder from [URL
as Specified in Certificate]
or [URL as Specified by
Administrator].
[Responder URL] Enter the URL of an OCSP
responder when [URL as
Specified by
Administrator] has been
selected for [Send Query
to Responder With]. Up to
255 alphanumeric
characters including
percent (%), at sign (@),
period (.), colon (:), slash (/
), underscore (_), hyphen (-
), tilde (~), question mark
(?), ampersand (&), and
equal sign (=) can be
entered.
[Communication Timeout] Specify a time-out value
for OCSP communication
from 5 to 60 seconds in 1
second increments.
[CRL Retrieval] [Auto Retrieval of CRL] Select whether or not to
automatically retrieve a
CRL.
[Communication Timeout] Specify a time-out value to
retrieve a CRL from 5 to 60
seconds in 1 second
increments.
To Next Page
Loading...
Need help?
General
