Fuji Xerox DocuPrint P505 d User Manual

Error Code
203
Problem Solving
11
016-404 [Cause]
An internal error occurred.
[Remedy]
Execute the operation again. If the same message is displayed
again, contact our Customer Support Center.
016-405 [Cause]
An error occurred in the certificate stored in the machine.
[Remedy]
Initialize the certificate.
016-406 [Cause]
An error occurred in the SSL client certificate.
[Remedy]
Take one of the following measures:

Store an SSL client certificate in the machine, and set it as the
SSL client certificate.

If an SSL client certificate cannot be set on the machine, select
an option other than EAP-TLS for the authentication method.
016-407
016-408
016-409
016-410
016-411
016-412
[Cause]
After automatically obtained the IP address, the machine failed to
retrieve proxy server settings from the DHCP server.
[Remedy]
Modify the customized program and install it again.
016-422 [Cause]
The machine is off-line.
[Remedy]
Perform the following:

When another error massage is displayed, solve the problem
first.

When the printer is in maintenance mode, complete the
maintenance operation.

When another device is accessing the machine, wait until the
access is complete.
If the problem persists, switch off the machine power, make sure
that the touch screen is blank, and then switch on the machine
power. If the same message is displayed again, contact our
Customer Support Center.
016-423 [Cause]
The machine is off-line.
[Remedy]
Perform the following:

When another error massage is displayed, solve the problem
first.

When a user is using the machine control panel, complete the
user operation.

When another device is accessing the machine, wait until the
access is complete.
If the problem persists, switch off the machine power, make sure
that the touch screen is blank, and then switch on the machine
power. If the same message is displayed again, contact our
Customer Support Center.
016-424
016-425
[Cause]
The machine is in Power Saver mode.
[Remedy]
Exit the Power Saver mode. If the problem persists, switch off the
machine power, make sure that the touch screen is blank, and
then switch on the machine power. If the same message is
displayed again, contact our Customer Support Center.
Error
Code
Cause/Remedy

Fuji Xerox DocuPrint P505 d Specifications

General

Brand	Fuji Xerox
Model	DocuPrint P505 d
Category	Printer
Language	English