Fuji Xerox DocuPrint P505 d User Manual

Error Code
205
Problem Solving
11
016-500 [Cause]
An error occurred.
[Remedy]
Switch off the machine power, make sure that the touch screen is
blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support Center.
016-502 [Cause]
An error occurred.
[Remedy]
Switch off the machine power, make sure that the touch screen is
blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support Center.
016-503 [Cause]
Unable to resolve the SMTP server name when sending e-mail.
[Remedy]
Check on CentreWare Internet Services whether the SMTP server
settings are correct. Also, confirm whether the DNS server settings
are correct.
016-514 [Cause]
An error occurred during processing of an XPS document.
[Remedy]
If an error occurred while printing from a driver which supports
XPS, print from the application using another print driver (PCL,
etc.).
If an error occurred while direct printing an XPS document, print
using the print driver (PCL, etc.) from XPS Document Viewer.
Note

XPS stands for XML Paper Specification.
016-515 [Cause]
There was insufficient memory during processing of an XPS
document.
[Remedy]
Take one of the following measures:

Set the image quality setting to standard. See the help of the
print driver.

Print using the print driver (PCL, etc.) from XPS Document
Viewer.
Note

XPS stands for XML Paper Specification.
016-516 [Cause]
The Print Ticket included in the XPS document includes an invalid
description or a print setting not supported by the machine.
[Remedy]
Check whether there is a problem with the method of using the
application that sent the print job, or with the content of the print
instruction.
If your application usage and print instruction are correct, check
with the application manufacturer that sent the print job for
operations of the application, not with Fuji Xerox.
If the error still is not resolved, contact our Customer Support
Center.
Note

XPS stands for XML Paper Specification.
016-517 [Cause]
There is an error in the content described in the PostScript file.
[Remedy]
Print with the PostScript driver. Furthermore, modify
ProcessColorModel described in the PostScript file so that the color
mode does not change.
Error
Code
Cause/Remedy

Fuji Xerox DocuPrint P505 d Specifications

General

Brand	Fuji Xerox
Model	DocuPrint P505 d
Category	Printer
Language	English