Fuji Xerox DocuPrint P505 d User Manual

Error Code
245
Problem Solving
11
"071-001" - "076-999"
Error
Code
Cause/Remedy
072-210 [Cause]
Tray 2 malfunction
[Remedy]
Confirm the paper loading condition for the Tray 2, and then
switch off the machine power, make sure that the touch screen is
blank, and then switch on the machine power. If the error still is
not resolved, contact our Customer Support Center. You can use a
tray other than Tray 2.
072-310
072-311
[Cause]
Tray 2 malfunction
[Remedy]
Switch off the machine power, make sure that the touch screen is
blank, and then switch on the machine power. If the error still is
not resolved, contact our Customer Support Center.
072-312 [Cause]
The optional feeder (Tray 2) may not be supported.
[Remedy]
Switch off the machine power, make sure that the touch screen is
blank, and then switch on the machine power. If the same
message is displayed again, remove the optional feeder (Tray 2)
from the machine.
073-210 [Cause]
Tray 3 malfunction
[Remedy]
Confirm the paper loading condition for the Tray, and then switch
off the machine power, make sure that the touch screen is blank,
and then switch on the machine power. If the error still is not
resolved, contact our Customer Support Center. You can use a tray
other than Tray 3.
073-310
073-311
[Cause]
Tray 3 malfunction
[Remedy]
Switch off the machine power, make sure that the touch screen is
blank, and then switch on the machine power. If the error still is
not resolved, contact our Customer Support Center.
073-312 [Cause]
The optional feeder (Tray 3) may not be supported.
[Remedy]
Switch off the machine power, make sure that the touch screen is
blank, and then switch on the machine power. If the same
message is displayed again, remove the optional feeder (Tray 3)
from the machine.
074-310
074-311
[Cause]
Tray 4 malfunction
[Remedy]
Switch off the machine power, make sure that the touch screen is
blank, and then switch on the machine power. If the error still is
not resolved, contact our Customer Support Center.
074-312 [Cause]
The optional feeder (Tray 4) may not be supported.
[Remedy]
Switch off the machine power, make sure that the touch screen is
blank, and then switch on the machine power. If the same
message is displayed again, remove the optional feeder (Tray 4)
from the machine.

Fuji Xerox DocuPrint P505 d Specifications

General

Brand	Fuji Xerox
Model	DocuPrint P505 d
Category	Printer
Language	English