EasyManuals Logo

Fuji Xerox DocuPrint P505 d User Manual

Fuji Xerox DocuPrint P505 d
279 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #246 background imageLoading...
Page #246 background image
Problem Solving
246
Problem Solving
11
"077-001" - "077-999"
"081-001" - "091-999"
"092-001" - "092-999"
Error
Code
Cause/Remedy
077-314 [Cause]
An error occurred.
[Remedy]
Switch off the machine power, make sure that the touch screen is
blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support Center.
077-322 [Cause]
An error occurred in the machine.
[Remedy]
Switch off the machine power, make sure that the touch screen is
blank, and then switch on the machine power. If the error still is
not resolved, contact our Customer Support Center.
077-327 [Cause]
Tray modules exceeding the prescribed number or the ones for
other machine types are connected.
[Remedy]
Remove unnecessary tray modules.
077-359 [Cause]
The optional feeder (Tray 5) may not be supported.
[Remedy]
Switch off the machine power, make sure that the touch screen is
blank, and then switch on the machine power. If the same
message is displayed again, remove the optional feeder (Tray 5)
from the machine.
Error
Code
Cause/Remedy
082-310
082-311
[Cause]
Tray 5 malfunction
[Remedy]
Switch off the machine power, make sure that the touch screen is
blank, and then switch on the machine power. If the error still is
not resolved, contact our Customer Support Center.
091-312
091-313
[Cause]
An error occurred in the machine.
[Remedy]
Switch off the machine power, make sure that the touch screen is
blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support Center.
Error
Code
Cause/Remedy
092-315 [Cause]
An error occurred.
[Remedy]
Switch off the machine power, make sure that the touch screen is
blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support Center.
092-316 [Cause]
Temperature sensor detected abnormality.
[Remedy]
Switch off the machine power, make sure that the touch screen is
blank, and then switch on the machine power. If the error still is
not resolved, contact our Customer Support Center.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fuji Xerox DocuPrint P505 d and is the answer not in the manual?

Fuji Xerox DocuPrint P505 d Specifications

General IconGeneral
BrandFuji Xerox
ModelDocuPrint P505 d
CategoryPrinter
LanguageEnglish

Related product manuals