Fuji Xerox DocuPrint P505 d User Manual

Problem Solving
250
Problem Solving
11
116-701 [Cause]
Unable to use the 2 Sided Printing feature because of insufficient
memory.
[Remedy]
Increase memory, or install the hard disk on the models of which
hard disk drive is an option. For information on installing the hard
disk, contact our Customer Support Center.
116-702 [Cause]
A print job was processed using a substitute font.
[Remedy]
Check the print data.
116-703 [Cause]
Probable causes are as follows:
1. An error occurred during PostScript
*
processing.
2. An error occurred because of insufficient memory.
3. An error occurred because of insufficient memory for PostScript
processing.
*: An optional component is required for some models. For more
information, contact our Customer Support Center.
[Remedy]
For 1, check the print data.
For 2, increase memory.
For 3, increase the value for [PostScript Memory].
116-710 [Cause]
The correct document size could not be judged because the
receive data exceeded the HP-GL/2
*
spool size.
*: An optional component is required for some models. For more
information, contact our Customer Support Center.
[Remedy]
Increase the size assigned to HP-GL/2 auto layout memory.
116-713 [Cause]
The data has been divided into several jobs because of insufficient
data storage space.
[Remedy]
Delete unnecessary data from the data storage space.
116-714 [Cause]
An HP-GL/2 command error occurred.
[Remedy]
Check the print data.
116-719 [Cause]
A feature not supported by the printer was executed.
[Remedy]
Cancel the parameters not supported by the printer.
116-720 [Cause]
An error occurred during print processing because of insufficient
memory.
[Remedy]
Stop unnecessary ports or delete unnecessary data to free up disk
space.
116-721 [Cause]
The machine has processed the preset operation printing in black
and white due to the restriction settings.
[Remedy]
Check the time permitted for the operation for you, and try again,
or consult your system administrator to change your
authorization.
116-722
116-723
[Cause]
The machine has processed the preset operation printing in black
and white due to the restriction settings.
[Remedy]
Consult your system administrator to change your authorization.
116-724 [Cause]
The machine has processed the preset operation printing in 2-
sided due to the restriction settings.
[Remedy]
Consult your system administrator to change your authorization.
Error
Code
Cause/Remedy

Fuji Xerox DocuPrint P505 d Specifications

General

Brand	Fuji Xerox
Model	DocuPrint P505 d
Category	Printer
Language	English