Paper and Other Media
54
Paper and Other Media
4
3 Adjust the paper guides as illustrated.
4 Load envelopes in the trays with the flaps closed, flap-side down, and the short edge
leading into the printer.
Do not load more than 50 envelopes into the tray, up to 45 mm in height.
5 Adjust the paper guides to align the edges of the envelopes.
6 Insert Tray 1 into the printer, then push it all the way in.
7 If [Tray Mode] is set to [Fully Adjustable], the printer prompts you to set the paper type, size
and color.
1) If the paper type, size and color are correct, select [OK].
2) If the paper type, size or color are incorrect, change the settings.
To select a paper type, touch the current paper type, and then select [Envelope] from the
list.
To select a size, touch the current size setting, and then select [Custom] from the list.
Touch the Length field and select a number value. Touch the Width field and select a
number value. Select [OK].
To select a different color, touch the current paper color, and then select the appropriate
color from the list.
3) Select [OK] to save the settings.
B5
A5 A4
7.25” 8.5”
B5
A4
10.5”
11”
To Next Page
Loading...
Need help?
General
