Fuji Xerox DocuPrint P505 d User Manual

Loading Paper
55
Paper and Other Media
4
8 From the [Print] dialog on your computer, select the paper setting values and click [OK]. To
feed and print the envelopes, click [Print].
Labels
You can print labels from the Bypass Tray or Tray 1.
 Guidelines for Printing Labels

Use labels designed for laser printing.

Do not use vinyl labels.

Do not feed a sheet of labels through the printer more than once.

Do not use dry gum labels.

Print only on one side of the sheet of labels. Use full-sheet labels only.

Store unused labels flat in their original packaging. Leave the label sheets inside the
original packaging until ready to use. Return any unused label sheets to the original
packaging and reseal it.

Do not store labels in extremely dry or humid conditions or extremely hot or cold
conditions. Storing labels in extreme conditions can cause print-quality problems or
cause labels to jam in the printer.

Rotate stock frequently. Long periods of storage in extreme conditions can cause labels
to curl and jam in the printer.

In the print driver software, select Label as the paper type.

Before loading labels, remove all other paper from the tray.
Important

Do not use any sheet where labels are missing, curled, or pulled away from the backing sheet. It could
damage the printer.
 Loading Labels in the Bypass Tray
1 Open the Bypass Tray. If the tray is already open, remove all paper from the tray.

Fuji Xerox DocuPrint P505 d Specifications

General

Brand	Fuji Xerox
Model	DocuPrint P505 d
Category	Printer
Language	English