.%ootingMode*
• Panoramas are created from multiple frames. Tile
camera may in some casesrecord a greater or lesser
angle than selected or be unable to stitch the frames
together perfectly. The last part of tile panorama
may not be recorded if shooting ends before the
panorama iscomplete.
• Shooting may be interrupted if the camera ispanned
too quickly or too slowly. Panning tile camera in a
direction other than that shown cancels shooting.
• Tile desired results may not be achieved with mov-
ing subjects, subjects close to the camera, unvarying
subjects such as the sky or a field of grass,subjects
that are in constant motion, such as waves and wa-
terfalls,or subjects that undergo marked changes in
brightness. Panoramasmay be blurred if tile subject
ispoorly lit.
Choose @ for seamless360 ° panoramas that carl be
played backin a loop (_ 66).
Tile [] SAVEOIRGIMAGE option in tile setup menu
carl be used to record a _ panorama in addition to
a seamless@ panorama (_ 105).
Depending on tile subject and shooting conditions,
tile camera may produce distorted results or a
panorama. Thetop and bottom of the area visible in
tile shooting display are cropped out and white strips
may appear at tile top and bottom of tile display.
o
ForBestResults
For best results, move tile camera in a small circle ._
steadyspeed,keepingtilecameratlor zontaland
being careful only to pan in tile direction shown by
tile guides. If the desired results are not achieved, try
panning at a different speed.
31
To Next Page
Loading...
