3
4
Highlight the number of
shots and press the selec-
tor right. Press the selector
up or down to choose the
number of shots in each
burst and left or right to
choose their distribution Dis_ributi°nl
(the number on the left istaken before and the
number on the right after the shutter button
is pressed). Press MENU/OKwhen settings are
complete.
Press DISP/BA(Kto return to shooting mode.
5 Take photographs. The camera begins record-
ing while the shutter button is pressed half-
way, and completes the burst when the shut-
ter button is pressed all the way down. The
illustration shows a burst of eight shots, three
before the shutter button is pressed and four
after.
.%utter button
.Shutterbutton pressedc;/Ithe
pressedhalfway waydown
IIIIIIIlUlUlll
_ L--r---I
"Before" "After"
shots shots
• If tile shutter button ispressed all tile way down be-
fore the number of frames selected for tile "before"
portion is recorded, tile remaining frames will be
taken after tile shutter button is pressed all tile way
down.
• Iftile shutter button ispressed haIfwayfor an extend-
ed period, the camera may record the burst before
tile shutter button is pressedall the way down.
44
To Next Page
Loading...
