FujiFilm X-E1 - Noise Reduction; K Long Exposure Nr; Select Custom Setting; K Edit;Save Custom Setting

71
Menus
Using the Menus: Shooting Mode
h
h
NOISE REDUCTION
NOISE REDUCTION
(
(
default:
default:
STANDARD)
STANDARD)
Reduce noise in pictures taken at high sensitivities.
K
K
LONG EXPOSURE NR
LONG EXPOSURE NR
(
(
default:
default:
ON)
ON)
Select ON to reduce mottling in long time-exposures (P 37).
u
u
SELECT CUSTOM SETTING
SELECT CUSTOM SETTING
Recall settings saved with K EDIT/SAVE CUSTOM SETTING.
K
K
EDIT/SAVE CUSTOM SETTING
EDIT/SAVE CUSTOM SETTING
Save settings (P 67).
F
F
Fn BUTTON
Fn BUTTON
(
(
default:
default:
N
N
ISO)
ISO)
Choose the role played by the Fn button (P 66).
v
v
DISP. CUSTOM SETTING
DISP. CUSTOM SETTING
Choose the items displayed in the view nder and LCD monitor (P 19). The following items can be displayed: framing grid (you
can also select the grid type as described on page 72), virtual horizon, focus distance (auto or manual), histogram, exposure
(shutter speed, aperture, and sensitivity), exposure compensation/exposure indicator, metering,  ash mode, white balance,  lm
simulation, dynamic range, number of exposures remaining, image size and quality, and battery level. See pages 5 – 6 for the
locations of these items in the displays. Press the selector up or down to highlight items and press MENU/OK to select or deselect.
Press DISP/BACK to exit when settings are complete.
Virtual Horizon
Virtual Horizon
Selecting
Selecting
ELECTRONIC LEVEL
ELECTRONIC LEVEL
displays a virtual horizon. The camera is level when the two lines overlap.
displays a virtual horizon. The camera is level when the two lines overlap.
R The virtual horizon may not be displayed if the camera lens is pointed up or down.
P