Working with the notebook
24 440 N00072
Dragging an object
Ê Activate only the function under Start - Control Panel - Printers and other Hardware / Mouse.
Ê Move the pointer to the item you wish to select.
Ê Select the desired object, and leave your finger on the touchpad.
Ê Drag the object to the desired position.
Ê Lift your finger from the touchpad.
The item will be moved.
Scrolling
i
An explanation of how to configure the scroll function can be found under Start -
Control Panel - Printers and other Hardware / Mouse.
LCD display panel
Information on LCD monitor
High-quality TFT monitors are installed in notebooks from Fujitsu Siemens Computers GmbH. The
specification of the monitor resolution indicates how many pixels can be displayed. For example,
"XGA" stands for 1024 x 768 pixels. Each pixel consists of three so-called subpixels of the colours
red, green and blue. As a result, an XGA monitor consists of 1024 x 768 x 3 = 2,359,296 subpixels.
The standard of production techniques today cannot guarantee an absolutely fault-free monitor. A
few isolated constant lit or unlit pixels may be present. To ensure the highest possible quality,
Fujitsu Siemens Computers uses only monitors that at least comply with the standard
DIN ISO 13406-2 (Class III).
TFT monitors are operated with background lighting. The luminosity of the background lighting can
decrease during the period of use of the notebook. The brightness of your monitor can be set
individually with the brightness control keys of the keyboard.
Display settings
Setting the desktop area
The screen resolution of the LCD monitor of your notebook is optimally set at the factory.
Changing the LCD screen brightness
You can adjust the brightness of your LCD screen with the [Fn] key and the horizontal arrow keys.
Changing the font size
Under Start - Control Panel - Appearance and Themes - display - Advanced you can choose between a
larger and a smaller font in the Font size field.
Synchronising the display on the LCD screen and an external monitor
Your notebook supports the simultaneous display on the LCD screen and an external monitor.
Pressing the key combination [Fn] + [F3] switches between LCD only, external monitor and LCD
and external monitor only. The last setting is useful if you would like high resolution and refresh rate
on an external monitor.
To Next Page
Loading...
Need help?
General
