Security functions
38 440 N00072
The window for password confirmation appears:
Ê Enter the password again and complete your entry with the
Enter key Ú.
The system sets the corresponding password field to Present.
Ê Press the [Esc] key to return to the start window BIOS Utility.
Ê Press [Esc] again.
The following dialogue box appears:
Ê Mark Yes and press the Enter key Ú to
save the password and exit the BIOS Setup.
Deleting a password
Ê If you would like to delete a password, then mark the password field with the cursor keys æ
and è.
Ê Select the setting None with the cursor key ç.
Ê Then exit the menu System Security and save this change in the BIOS as described in the
section "Setting and changing a password".
To Next Page
