Working with the notebook
28 440 N00072
PC cards
Two PC card slots enable the notebook to operate two type I/II PC cards or one type III PC card
(CardBus or PCMCIA).
!
Consult the documentation supplied by the PC card's manufacturer and follow the
instructions provided.
Never use force when inserting or removing a PC card.
Make sure that foreign objects do not fall into the PC card slot.
Installing a PC card
Ê Insert the PC card, contacts first, into the
slot guide. The labelled side of the PC card
should be facing upward.
Ê Gently push the PC card into the slot until
you feel it click into place.
i
Consult the documentation supplied with the PC card for information on how to
install the necessary device drivers.
For further information refer to the information files (e.g. *.TXT, *.DOC, *.WRI or
*.HLP) provided on the PC card driver diskette or the information in the operating
system manual.
You can push the PC card slot eject buttons into the notebook casing. Press the
eject buttons until they snap in.
To Next Page
Loading...
Need help?
General
