- (01-166) -
MULTI TYPE
2, 3, 4 ROOMS TYPE
MULTI TYPE
2, 3, 4 ROOMS TYPE
FUNCTION SETTING
3) Press the "Set Time <" button or the "Set Time >" button, to select the function number.
Function number
4) Press the "SET TEMP. V" button or the "SET TEMP. Λ" button, to select the setting number.
The display ashes during setting number selection.
Ex.) Function number : 30, Setting number : 01
Setting number
5) Press the "TIMER SET" button, conrm the setting.
(The data will be transferred to the indoor unit.)
GOOD
ERROR
When the data was not set up on the indoor ●
unit "--" is displayed.
Set up the data again according to the ●
procedure in step 3), 4) above.
When the data was correctly set up on the indoor
unit.
(Flashing display changes to illuminated display.)
FUNCTION DETAILS
Refer to 13-5. FUNCTION DETAILS
To Next Page
Loading...
Need help?
General
