- (01-165) -
MULTI TYPE
2, 3, 4 ROOMS TYPE
MULTI TYPE
2, 3, 4 ROOMS TYPE
MODEL: UTY-RNN13-3-1.
M
SWITCHING SELECTION OF FUNCTION SETTING MODE
2) To activate the function setting mode, hold down the three buttons "SET TEMP. V", "SET
TEMP. Λ" and "FAN" at the same time for 5 seconds or longer.
Function setting mode initial display
BUTTON NAME AND FUNCTION
During address setting mode, indoor unit will reject any operation command from the remote ●
controller.
Function number
Refer to FUNCTION DETAILS
Remote controller address
Fixed to 00.
Set Time “<” and “>” button
Switches the function number.
Setting number
Refer to FUNCTION DETAILS
SET TEMP. “V” and “
Λ
” button
Switches the setting number.
TIMER SET button
Transmits function setting
To Next Page
Loading...
Need help?
General
