Troubleshooting and tips
Cause
Remedy
Wrong monitor has been set under Window XP ► Restart the device.
► Press
F8
while the system is booting.
Either the Windows Advanced Start Options menu
or the menu for selecting the op erating system
appears.
► If the menu for selecting the operating
system appears, press
F8
.
► SelectSafe Mode or Safe Mode with Network .
► Go to Start – Settings – Control Panel – Display
and the tabs Appearan c e, Theme s, Set tings
to set the correct values for the connect e d
monitor as described in the operating
manual of the monitor.
Incorrect setting fo
r the monitor in Windows Vista
► Restart the device.
► Press
F8
while the system is booting.
Either the Windows Advanced Start Options menu
or the menu for selecting the op erating system
will appear.
► If the menu for selecting the operating
system a ppears, press the
F8
key.
► Select Safe Mode or Safe Mode with Network .
► Go to Start symbol – (Settings) – Control
Panel – Appearance and Personalization –
Personalization and enter the correct values
for the connected monitor as described in
the operating manual of the monitor.
Wrong monitor has be en set under W indows 7 ► Restart the device.
► Press
F8
while the system is booting.
Either the Windows Advanced Start Options menu
or the menu for selecting the op erating system
appears.
► If the menu for selecting the operating
system appears, press
F8
.
► Select Safe Mode or Safe Mode with Network .
► Go to Start – Control Panel – Appearance
and Personalization – Display to enter the
correct values fo r the connected monitor as
described in the operating manu al of the
monitor.
The wrong R A M m od ules have been inserted
► See th
e technical manual for the mainboard
for in
formation on which memory modules
can b
e used.
30 Fujitsu Technology Solutions
To Next Page
Loading...
