Fujitsu CELSIUS W510 - Removing the Module Holder; Screwing the Reader Onto the Module Holder

System expan sio ns
Removing the module holder
► Open the casing (see "O pening t he casing", Page 35).
► Disconnect t he cables connected to the m odule holder.
1
1
2
► Remove the s crews (1) on the modu le holder.
► Slide the module holder out of the casing in the direction of the arrow (2).
Screwing the reader onto the module holder
2
2
a
a
1
► With the componen t side facing downwards,
slide t he reader in the d irection of arrow (1)
into the guide on the module holder (a).
► Fasten the reader with the screws (2).
Fujitsu Technology Solutions 41