Troublesho oting and tips
No mouse pointer displayed on the screen
Cause
Remedy
The mouse is not correctly connected.
► Shut d own the operating syst em properly.
► Switch the device off.
► Check th at the mouse c able is prop erly
connected to the syste m unit. If you use an
adapter or extension lead with the mouse
cable, check the connections.
► M ake sure that only one mouse is
connected.
► Switch the device on.
The mouse c ontro ller is not enabled.
► Check in the BIOS-Setup whether the mouse
controller is enabled.
► Check that the m ouse dr
iver is properly
installed and is pres
ent when the application
programme is st arte
d. Detailed infor m ation
can be found in the us
er guide for the mouse
and applica tion pro
gramme.
Time and/or date i
s not correct
Cause
Remedy
Time and date are incorrect.
► Set the correct time and date within the
operating system you are using.
or
► Set the correct time and/or date in the
BIOS Setup.
The lithium battery is discharged.
► If the time and d ate are repeatedly wron g
when you switch on your device, replace the
lithium battery (see "
Repla cing the lithium
battery", Page 62).
Error messages on the scree n
Error mes
sages and their explanations are provided:
•inthete
chnical m a nual for the mainboard
• in the documentation for the programs used
Installing new software
When i
nstalling programs or drivers, important files may be overwritten and modified. To
be abl
e to a ccess the original data in the event of any problems following installation,
you s
hould backup your hard disk prior to installation.
Fujitsu Technology Solutions 31
To Next Page
Loading...
