System expan sio ns
Installing and removing the accessible 5
1
/
4
inch drive
Fitting the drive c over for th
e5
1
/
4
inch driv e
To use the latch function of the accessible 5
1
/
4
inch drive, you must fit the corresponding
drive co ver before installing the drive in th e casing. Proceed as follows:
► Open the casing (see "
Opening the cas ing", Page 35).
2
3
1
► Unlock the drive cover (1).
► Push the drive cover upwards (2) so it is released from the catches with which it is secured.
► Lift the drive cover away from the casing (3).
1
► Connect the drive cover to the drive (1).
Fujitsu Technology Solutions 37
To Next Page
Loading...
