System expan sio ns
Removing a board
► Open the casing (see "O pening t he casing", Page 35).
Board
► Disconnect the cables connected to th e board.
1
2
► Push the retaining clip (1) towa rds the slot cover to unlock it, then move
it towards back panel of the device.
► Pull th e board out of the slot in the dire ction of the arrow (2).
► Place the board in suitable packaging.
For cooling, protection against fire, and in order to comply with EMC (electromagnetic
compatibility) regula tions, you must refit the slot cover.
2
1
► Slide the slot cover into the slot (1).
Fujitsu Technology Solutions 59
To Next Page
Loading...
