System expansions
Install an accessible 3
1
/
2
inch drive (e.g. diskette drive)
► Open the casing (see "Opening the casi ng", Page 32).
Diskette drive,Diskette drive,
► Remove the accessible 5
1
/
4
inch drive (see "Removing an accessible 5
1
/
4
inch dr ive (e.g. DVD drive)" , Page 38).
► Remove the front panel from the c asing.
► From the inside, press the plastic drive cover out of the front panel.
1
► Break out the pre-sta mped me tal cover on the drive bay opening w ith a screw driver (1).
► Secure the front panel on the casing again.
2
2
1
► Slide the drive into the casing (1). Make sure that the screw holes are aligned.
► Fasten the drive into place with the scre ws (2).
► Plug the data and the power supply connectors into the drive. Make sure the p olarity is correct.
► Close the casing (see "
Closing the casing", Page 33).
40 Fujitsu Technology Solutions
To Next Page
Loading...
