System expansions
Install an accessible 3
1
/
2
inch drive (e.g. diskette drive)
► Open the casing (see "Opening the casin g", Page 32).
Diskettedri ve,Diskette drive,
► Remove the accessible 5
1
/
4
inch drive (see "Removing an accessible 5
1
/
4
inch drive (e.g. DVD drive)", Pa ge 38).
► Remove the f ront panel from the casing.
► From the inside, press the plastic drive cover out of the front panel.
1
► Break out the pre-sta mped me tal cover on the drive bay opening with a screwdriver (1).
► Secure the front panel on the casing again.
2
2
1
► Slide the drive into the casing (1). Make sure that the screw holes are aligned.
► Fasten the drive into place with the screws (2).
► Plug the data and the power supply connectors into the drive. Make sure the polarity is correct.
► Close the casing (see "
Closing the casing", Page 33).
40 Fujitsu Technology Solutions
To Next Page
Loading...
