Fujitsu ETERNUS DX60 S3 - Chapter 2 Specifications; Specifications; Table 2.1 Specifications (ETERNUS DX60 S3)

Chapter 2
Specifications
This chapter describes the specifications, the function specifications, and the operating environment of the
ETERNUS DX.
2.1 Specifications
Table 2.1 Specifications (ETERNUS DX60 S3)
Item ETERNUS DX60 S3
Physical capacity (max.) (*1) SAS disks 28.8TB
Nearline SAS disks (*2) 144.0TB
Number of controllers 1 / 2
Cache capacity 2GB / 4GB
Host interface (maximum transfer rate) FC (8Gbit/s)
iSCSI (1Gbit/s)
SAS (6Gbit/s)
Number of host interface ports FC 2 / 4
iSCSI 2 / 4
SAS 2 / 4
Number of drives 2 – 24
Drive capacity (rotational speed) 2.5" SAS disks 300GB, 600GB, 900GB, 1.2TB
(10,000rpm)
300GB, 600GB (15,000rpm)
2.5" Nearline SAS disks 1TB (7,200rpm)
3.5" SAS disks 900GB, 1.2TB (10,000rpm)
3.5" Nearline SAS disks 2TB, 4TB, 6TB (7,200rpm)
Drive interface (maximum transfer rate) SAS (6Gbit/s)
*1: Physical capacity is calculated based on the assumption that 1TB=1,000GB and 1GB=1,000MB.
*2: The maximum physical capacity is calculated based on the assumption that 3.5" Nearline SAS disks are
installed.
The capacity is 24TB when 2.5" Nearline SAS disks are installed.
16
FUJITSU Storage ETERNUS DX60 S3 Disk storage system Overview
Copyright 2014 FUJITSU LIMITED
P3AM-8972-01ENZ0