Fujitsu ETERNUS DX60 S3 - Power Control; Figure 3.14 Power Synchronized Unit Diagram

3.6.5 Power Control
Power control methods for the ETERNUS DX are described below.
•
Power synchronized unit
•
Wake On LAN
■
Power Synchronized Unit
A power synchronized unit detects changes in the AC power output of the Uninterruptible Power Supply (UPS)
unit that is connected to the server and automatically turns on and off the ETERNUS DX.
For more details about power synchronized units, refer to "Configuration Guide (Power Synchronized Unit)".
Figure 3.14 Power Synchronized Unit Diagram
RS232C cable
ServerServer
Power synchronized
unit
ETERNUS DX
OFF
UPS
for server
UPS
for server
ON
AC cableAC cable
AC cable
AC cable
Chapter 3 Functions
3.6 Operation Management
39
FUJITSU Storage ETERNUS DX60 S3 Disk storage system
Overview
Copyright 2014 FUJITSU LIMITED
P3AM-8972-01ENZ0