Using the ETERNUS Multipath Driver to monitor the storage system by host senses is recommended. Sense
codes that cannot be detected in a single configuration can also be reported.
Figure 3.12 Event Notification
SNMP
manager
Mail
server
Syslog server
Remote
support
center
REMCS/AIS Connect
Host sense
Server (host)
syslogSNMP TrapE-mail
ETERNUS DX
3.6.3 Performance Information Management
The ETERNUS DX supports a function that collects and displays the performance data of the storage system
via ETERNUS Web GUI or ETERNUS CLI. The collected performance information shows the operation status and
load status of the ETERNUS DX and can be used to optimize the system configuration.
Performance information that can be collected includes host I/O information (IOPS values, throughput val-
ues, response time, cache hit rate) and the usage information of CMs (CPUs) and drives.
ETERNUS SF Storage Cruiser or ETERNUS SF Express can be used to easily understand the operation status and
load status of the ETERNUS DX by graphically displaying the collected information on the GUI. An administra-
tor can also use ETERNUS SF Storage Cruiser to monitor the performance threshold and specify how long per-
formance information is retained.
Chapter 3 Functions
3.6 Operation Management
37
FUJITSU Storage ETERNUS DX60 S3 Disk storage system Overview
Copyright 2014 FUJITSU LIMITED
P3AM-8972-01ENZ0
To Next Page
Loading...
